List of products by brand MikroTik

The MikroTik CADDY is a 10-pack of replacement NVMe drive tray inserts purpose-built for the MikroTik ROSE Data server (RDS). Each tray provides quick, secure NVMe drive mounting within the RDS chassis — allowing drives to be installed, swapped, or replaced cleanly without improvised mounting solutions. For a pack of 10, the CADDY is the essential on-site spare for any ROSE Data server deployment where NVMe drives are added, replaced, or rotated over the server's operational life.

The MikroTik SR-10U SolidRack 10 is a 19" 10U desktop rack — adjustable angle, aluminium construction, rear multi-plug extension cord attachment point, cable management space, includes screws for 10 devices plus rack mounting hardware. Compatible with all standard 19" rack-mount devices from MikroTik and other vendors. With the optional K-79 accessory kit, fits up to 4× RB5009UG+S+IN routers per 1U (40 RB5009 total). Mount under a desk, on a desk, or on a bench. No electronics, no firmware, no certification required. MTBF ~100,000 hours at 25°C. Suggested price USD 49.00.

The S+AO0005 is a 5-meter SFP+ Active Optics direct attach cable that supports 10Gbps connectivity. It provides a cost-effective solution for connecting two SFP/SFP+ devices within or across adjacent racks.

The PWR-LINE AP is a versatile Wi-Fi access point designed to extend your network through the power lines in your premises. Ideal for areas with thick walls, it connects seamlessly with MikroTik routers. With a Type A plug suitable for USA, Canada, Mexico, and Thailand, this compact device integrates with up to eight PWR-LINE devices, offering an extended network without rewiring.

The MikroTik mAP (RBmAP2nD) is a tiny, full-featured 2.4GHz wireless access point that packs dual-chain 802.11b/g/n (Wi-Fi 4) wireless, two Ethernet ports, PoE output, and the complete MikroTik RouterOS feature set into an extremely compact 68 × 68 × 19 mm housing. Designed for discreet indoor installations where space is at a premium, the mAP supports three power input options — DC jack, 802.3af/at PoE, or microUSB — and can pass passive PoE through to a connected device on Ethernet port 2. Running RouterOS with a QCA9531 processor at 650 MHz and 64 MB of RAM, the mAP is well suited for hotel rooms, vehicles, small offices, or any location where a lightweight, versatile, low-power access point is needed.

The MikroTik GPEN21 is a smart power injector and software-controlled Ethernet repeater — Marvell 88E6341 switch chip, SwitchOS Lite, 2× GbE (Ether1 data-in + Ether2 passive PoE-out up to 57V) + 1× SFP port for fiber uplink, dual power input (DC jack 12–57V + 802.3af/at PoE-in), 30W max / 3W without attachments, mode button, passive cooling, IP20, -20°C to +70°C, MTBF ~100,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Wall or cabinet mountable. Includes K-62 kit. Free software updates for life of product or minimum 5 years from purchase.

The MikroTik RB260GS is a compact smart switch with 5x Gigabit Ethernet ports, 1 SFP cage, and SwOS for easy configuration. Ideal for small office and home networks.

The MikroTik MT-HotSwapFan is a hot-swappable replacement fan designed for MikroTik's newest high-performance devices, including the flagship CCR2216 and CRS518. It allows you to replace a failed fan without shutting down or restarting the device, eliminating unnecessary downtime. An essential spare for any network environment where continuous operation is a priority.

The MikroTik MT-HotSwapFan ensures uninterrupted operation by offering hot-swappable replacement fans for devices like CCR2216 and CRS518.

The MikroTik XQ+DA0001 is a 1-metre passive Direct Attach Copper (DAC) twinax cable with QSFP+ to QSFP+ and QSFP28 to QSFP28 connectors, supporting both 40 Gigabit and 100 Gigabit data rates. Designed for direct short-reach interconnects between QSFP28-equipped MikroTik devices — including the CCR2216, CRS504, CRS518, CRS510, and CRS520 — it offers a plug-and-play, zero-latency alternative to fibre transceivers and patch cables for within-cabinet or same-rack connections. The 1-metre length is the ideal choice for connecting devices installed in adjacent rack units or a tightly grouped cabinet stack.