List of products by brand MikroTik

The MikroTik Wireless Wire (RBwAPG-60adkit) is a complete point-to-point wireless kit that replaces a Gigabit Ethernet cable with a 60 GHz radio link — delivering 1 Gbps full duplex throughput for distances of up to 200 metres. The kit includes two wAP 60G devices that are pre-paired at the factory, so installation is as simple as pointing the two units at each other and powering them on. The 60 GHz link operates outside the congested 2.4 GHz and 5 GHz Wi-Fi spectrum, providing a stable, interference-free connection secured with AES encryption. Each unit runs RouterOS Level 3 on a quad-core ARM processor, is PoE-powered, rated IP55, and rated for outdoor operation from -40°C to +70°C. 

The MikroTik CRS310-8G+2S+IN is a compact 2.5 Gigabit desktop/rackmount switch — 8× 2.5G Ethernet ports, 2× SFP+ ports (multi-rate: 1G / 2.5G / 10G), Marvell 98DX226S switch ASIC with integrated dual-core ARM32 CPU at 800 MHz, 256 MB RAM, 32 MB FLASH, RouterOS v7 License 5 / SwitchOS (dual-boot), 1× USB 2.0 Type-A (1A, USB Power Reset), DC jack 18–57V input, single fan active cooling, IP20, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.5A power adapter, K-48 fastening set, rackmount ears. 

The MikroTik RB5009UG+S+IN is a compact quad-core desktop router — Marvell Armada 88F7040 ARMv8 at 350–1,400 MHz (auto), Marvell Amethyst 88E6393 switch chip, 1 GB DDR4 RAM, 1 GB NAND storage, RouterOS v7 License 5, 7× GbE + 1× 2.5G Ethernet + 1× SFP+ 10G (all connected to switch chip via 10 Gbps full-duplex line to CPU), USB 3.0 type A (1.5A), 3× power inputs (PoE-in 802.3af/at, DC jack 24–57V, 2-pin terminal 24–57V), passive cooling (case as heatsink), CPU temperature monitor, 220 × 125 × 22 mm, -40°C to +60°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-55 screw kit + 24V 1.5A power adapter. USD 219.00.

The MikroTik CRS326-24G-2S+RM is a 24-port Gigabit switch with 2x SFP+ cages, dual boot OS (RouterOS/SwOS), and advanced management features in a 1U rackmount case.

The MikroTik CRS112-8P-4S-IN is an 8-port Gigabit PoE switch with 4 SFP cages, multiple PoE output options, and RouterOS L5 for advanced network management.

The MikroTik netPower Lite 8P (CSS610-8P-2S+OUT) is a compact, low-cost outdoor PoE switch with an integrated UPS and smart battery charger — keeping CCTV cameras, access points, and wireless backhaul online even when the grid goes dark. It features 8× Gigabit Ethernet PoE-out (802.3af/at), 2× 10G SFP+ uplinks, 120W total PoE budget, 24–57V DC input, IP54 weatherproofing, and SwOS Lite — built for WISPs, CCTV deployments, apartment buildings, utilities, and smart-city installations.

The MikroTik Chateau PRO ax is MikroTik's highest-performance home and office Wi-Fi 6 router — AX3600 dual-band Wi-Fi 6 with 4×4 MIMO on both 2.4 GHz (1,148 Mbps, QCN-5024, 5 dBi) and 5 GHz (2,400 Mbps, QCN-5054, 6 dBi), quad-core ARM64 IPQ-8072A at 2.2 GHz, 1 GB RAM, 5× Gigabit Ethernet ports, passive PoE-out on Ether5 (up to 22.8W), USB 3.0 type-A (1.5A), RouterOS v7 License 6, DC jack 18–57V, 55W max, passive cooling, -40°C to +70°C, MTBF ~200,000 hours. CE, FCC, IC, EAC, and RoHS certified — fully IC-certified for Canadian sale. Includes 48V 1.35A power adapter.

The MikroTik CRS304-4XG-IN is a compact 4-port 10 Gigabit Ethernet desktop switch and router — 4× RJ45 10GbE copper ports (no SFP, no SFP+), Marvell Prestera 98DX3236 switch chip, quad-core ARM64 AL21400 at 1,400 MHz, 1 GB RAM, 1 GB NAND, dual-boot SwOS and RouterOS v7 License 6, USB 3.0 Type-A, DC jack (18–28V), passive cooling, IP20, -20°C to +50°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes 24V 1.2A power adapter. The correct compact 10GbE desktop switch for homelab operators, small server rooms, and 10G-ready workstation deployments where RJ45 copper 10GbE connectivity is required without SFP+ cabling, transceivers, or rack infrastructure.

The MikroTik CubeSA 60Pro ac is an outdoor 60 GHz sector access point designed for point-to-multipoint (PtMP) deployments, allowing a single unit to connect multiple 60 GHz client devices at distances of around 600 metres. Using the 802.11ay standard on the 60 GHz band and a 5 GHz 802.11a/n/ac (Wi-Fi 5) radio as an automatic backup, it delivers high-throughput, interference-free wireless links in environments where the 2.4 GHz and 5 GHz spectrum is congested. The unit is built on a quad-core ARM CPU with a metal base enclosure rated IP66 for outdoor deployment, runs RouterOS with a Level 4 licence, and is powered via a single 802.3af/at PoE input. It includes built-in GPS for precise location tracking and timing.

The MikroTik CRS310-1G-5S-4S+IN is a 1U rack-mount fibre switch — Marvell 98DX226S dual-core ARM 32bit switch chip at 800 MHz (CPU + switch ASIC combined), 256 MB RAM, 16 MB FLASH, RouterOS v7 / SwitchOS dual boot, License 5, 5× SFP (1G), 4× SFP+ (10G), 1× GbE (direct switch chip connection), RJ45 serial console, 2× DC inputs (DC jack 18–57V + 802.3af/at PoE-in 18–57V), 1 fan, 20W max / 8W without attachments, CPU + PCB + voltage monitors, IP20, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS — no FCC, no IC. Includes K-48 fastening set, rack ears, 24V 1.2A adapter. USD 199.00.