Hardware

The MikroTik HS-55DLC80D is a high-performance 1G / 2.5G SFP optical transceiver designed for long-distance single-mode fiber links up to 80 km. It uses a 1550nm wavelength, Dual LC UPC connector, and supports both 1G and 2.5G data rates, making it a direct upgrade from the previous S-55DLC80D 1.25G module. 

TG-LR82 is a compact LoRaWAN multi-sensor device with temperature, humidity, motion, and event detection, designed for long-range IoT monitoring with low power consumption and flexible automation.

The MikroTik MT-HotSwapFan-V2 is a hot-swappable replacement fan module designed exclusively for the CRS804 DDQ switch. It allows a failed or aging fan to be replaced without powering down the switch, eliminating downtime in environments where continuous operation is critical. Ideal for AI clusters, storage networks, and high-speed backbone deployments where sustained airflow and cooling reliability cannot be compromised.

This 50 micron (OM4) laser optimized fiber optic cable is made with Corning glass fiber. It has 2mm jacket and rated low smoke zero halogen (LSZH) & riser (OFNR). They are tested to provide the optimum data transmission and network stability. They are used for connections to data center, CATV, fiber test equipment, LAN, telecommunication networks, FTTx, communication rooms and fiber optic communication system.

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection — injects passive PoE power to mast-mounted antennas and access points while protecting downstream switches from lightning strikes and static build-up on outdoor cable runs. Designed as the ground-level companion to the GESP surge protector (mounted at the top of the mast) — together forming a dual-end surge protection system for outdoor deployments. Passive device — no RouterOS, no firmware, no configuration. Includes K-73 fastening set. Recommended attachment: PVC zip ties. USD 12.00.

The RB4011 Wall Mount Kit is a secure mounting solution designed to protect your RB4011 router and its Ethernet ports in public or high-traffic areas, preventing unauthorized access and accidental disconnections.

These 9 micron (OS2) fiber optic cable is made with Corning ClearCurve LBL glass fiber, which exceeds ITU-T G.657.A2/B2 and remains compatible and fully compliant with ITU-T G.652.D. It has 2mm jacket and rated riser (OFNR). They are tested to provide the optimum data transmission and network stability. They are used for connections to data center, CATV, fiber test equipment, LAN, telecommunication networks, FTTx, communication rooms and fiber optic communication system.

CCR3232-16XG-4DS-2DQ is a high-performance Cloud Core Router powered by Ampere CPUs, offering 200G/400G connectivity, advanced routing features, and scalable performance for modern data center and ISP networks.

The MikroTik Chateau LTE18 ax is the Generation 6 flagship home and office LTE router — CAT18 LTE delivering up to 1.2 Gbps downlink with 4×4 MIMO, dual-band Wi-Fi 6 (574 Mbps at 2.4 GHz, 1,200 Mbps at 5 GHz), four Gigabit Ethernet ports plus a 2.5 Gigabit Ethernet port, 4 built-in LTE antennas with 2 optional external antenna ports, quad-core ARM64 IPQ-6010 at 1.8 GHz, 1 GB RAM, WPA3, USB-A, RouterOS v7 License 4, -40°C to +65°C. Single DC jack input (12–28V), passive cooling, 19W max, 240 × 156 × 44 mm. Includes 24V 1.2A adapter and 1.5m UTP flat cable. The complete LTE home router for households and small offices replacing fixed broadband with a single, elegant device.

The MikroTik Wireless Wire nRAY (nRAYG-60adpair) is a kit of two pre-paired 60 GHz point-to-point devices — 88F3720 dual-core ARM64 at 1 GHz per unit, 256 MB RAM, 16 MB flash, RouterOS v7 License 3, AES-encrypted wireless link, up to 2 Gbps aggregate throughput at distances up to 1,500 m, 1× GbE per unit (802.3af/at PoE-in, 12–57V), 7W max per unit, passive cooling, IP55, snow-resistant form factor, fine-tune alignment screws, 261 × 166 mm per unit, -30°C to +70°C, MTBF ~200,000 hours at 25°C. CE, FCC, IC, EAC, RoHS. Includes 2× 24V 0.38A power adapter, 2× Gigabit PoE injector, 2× nRAY solidMOUNT pole adapter, 2× nRAY aiming tool. Pre-configured — plug in and point.